Лебедка для подъема грузов – это устройство, предназначенное для перемещения груза посредством передачи тягового момента через канат или трос. Она получила широкое распространение благодаря своей универсальности и простоте в эксплуатации. Ведь с помощью лебедки можно перемещать груз не только вертикально, но горизонтально и под наклоном.
Виды лебедок
Существует множество видов лебедок в зависимости от конструкции и предназначения устройств. Различают их по типу тягового элемента:
- канатные (тросовые);
- цепные.
В зависимости от привода могут быть ручные, электрические, пневматические и с двигателями внутреннего сгорания. Лебедки бывают стационарные (закрепленными неподвижно к потолку, полу или стене) или мобильные (для передвижения по канатным путям или на тележках).
В ассортименте продукции ООО «Донбасская индустриальная компания» имеется широкий выбор лебедок:
- вспомогательные;
- электрические;
- маневровые;
- предохранительные;
- пневматически маневровые;
- электрические маневровые;
- монтажные электролебедки;
- посадочные тяговые;
- скреперные и другие.
Лебедки, произведенные ООО «ДИК», имеют такие преимущества:
- высокая грузоподъемность;
- повышенная износостойкость тягового элемента;
- надежность приводного механизма;
- демократичная цена;
- европейский уровень качества.
-
Winches 1ADW-09, 1ADW-10
Winches are produced on the basis of cone-worm special lift reducer CWSLR-160 and open gear transmition, distant control with automatic brakes on the worm-screw of the reducer, independent manual control of the starting mechanism according to the preset program , great pulling force if low weight.
-
Auxiliary air-duct winch AADW-50
Designed for ventilating air flow reversing through switching shaft doors and sliding shutters in subwater channel and fand evasee, and for switching flag doors, separating working fan from the reserve fan.
-
Shaft auxiliary winch 1SAW-01
Designed for freight hauling in horizontal mine openings of gas and dust hazardous coal mines.
These winches can be applied in the mines of any category, including gas and dust hazardous mines. -
Auxiliary winches
Designed for descending and hoisting equipment and materials.
-
Shunting winch SW
Designed for pulling rail low-sided wagons with carrying capacity of 63 … 125 t at loading points with performance of 200 … 400 t / h. Rail road way (rails) must be free of spillage material, litter, snow, ice. Winches can be used for subsidiary work connected with freight movement along a horizontal track. Winches are highly reliable and trouble-free in operation.
-
Shaft winch SW
Is designed to move equipment in mounting and dismounting cambers of stope and development workings without limitation of inclination angles in gas and dust hazardous coal mines. Can be used to deliver equipment and materials through development workings, extract roadway supports and equipment in case of workings shut-downs, for subsidiary works while mounting and dismounting of mining complexes and other works related to moving and hoisting freight.
-
Preventive winch PW
Designed to hold the coal-mining machine in case of coal combine’s pulling device interruption or if its frive is off.
-
Shaft auxiliary winch SAW-18000×0,25P
Auxilary mine winch is designed for relocating goods and equipment, materials handling and mounting and dismounting operations in shaft conditions.
-
Pneumatic shunting winch PSW and PSW-01 (SSP-14)
Is designed for shunting operations, moving trains when loading coal into cars in the horizontal workings of coal mines equipped with pneumatic power.
-
Pneumatic mechanical rope winch PMRW
It is used in any mines of gas and dust based category for installation in the complexes for coal loading into railway cars on the surface, and for remote control of gates, valves and barriers of receiving and departure platforms of coal mines.
It is used in any climate conditions with ambient temperature not lower than 1° С. -
Electric shunting winches ESW
Are designed for moving railway cars, platforms and tank cisterns. The use of railway winches ESW on loading and off-loading areas on railway landings allows to replace locomotives and save expenses significantly.
-
Electric installation winches IW
Are designed for moving heavy loadings during mounding operations related to hoisting, holding the installing elements in suspension before mounting the design position, as well as for completing units of hoisting machines. Operating position of the winch is its mounting on level ground. The winch can be exploit in the macroclimate areas with mild climate (M climate version). The winch is not made for men hoisting.
-
Installation winch IWT-150
Is designed to move the stall equipment of mechanized longwall set of equipment inside the mounting (dismounting) rooms coal mines’ working face with an inclination angle of 35 °. The winch may be used for: delivering of equipment to the long-face place in the development working with inclination angle up to 90 °; unloading its vehicle or loading the vehicle; delivering the equipment inside the development working in trucks, skips or buckets;extracting lining and equipment in case of workings shut-down and doing other supporting works.
-
Prop-drawing winch PDW-130
Is designed for subsidiary work during mounting (dismounting) of mechanized longwall set of equipment with mechanized face caving by continuous collapse method, extraction of wood in gas (methane) and dust hazardous horizontal mine workings. The winch can be used to move cargo without independent moving in the workings sloping up to 10 °, and also during shunting work to haul up railway low-sided cars on horizontal sections of loading points. The winch can be used at sites where there is enough electrical general purpose industrial equipment according to safety rules.
-
Electric scraper winches SW
Are designed to deliver loosened mined rock of underground development of natural resources, they are also used at open-cut mining and are means of storage mechanization of bulk and lump materials. To-and-fro motion of a scraper is carried out by switching on and off the working and idler drum by handbrake of planetary reducers.
-
Mining rope mechanical winch 1MRMW
Is designed for moving and holding of a cutter-loader in case of breakage of pulling unit which do not have their own haulage end and working during the coal extraction at slope angle of 30-90 °. Single-drum winch is designed for mounting (dismounting) of header unit (HU). The electric- or pneumo- versions of the winch is produced.
-
Sinking winches ESW (ESWM, ESW)
Sinking mobile electric winches are designed for hanging the equipment when driving vertical mine workings with installation on the surface.
-
Prop-drawing pulling (rope) winch PDRW-10D, PDW-10D
Are designed for mechanized face caving by continuous collapse method in steep and hollow seams fall in coal mines, including gas and dust hazardous mines, and for moving cargo over the soil at an shaft working inclination angle up to 15 °.