Worm feeders of WF-type

Are designed for handling bulk products (with bulk density from 0,4 to 4,5 t/min) to weight batcher, mixing machines and other devices.
Are transporters where loads move by dragging on fixed chute (pipe) with swiveling rotor blades.

Worm feeder consists of a chute, a screw auger with lead-in and transporting parts and a head section. Feeder’s drive is carried out with the help of electric motor and worm reducer (or geared motor). Feeder’s lead-in part is equipped with variable vanes (with variable pitch). Auger’s transporting part is built as closed screwed surface with 120, 200, 250, 400 mm pitch. Diameter of a pipe or a chute can vary between 89 and 1000 mm.
Worm feeders of more than 8m in length are constructed out of a number of transporting sections. The feeders can be produced with right and left (upper/lower) wire section layout with relation to the auger axis.

Name of the parameter and size WF-160 WF-200 WF-250 WF-320 WF-400 WF-500
Power capacity of electrical motor, kW 0,75…7,5 1,1…18,0 2,2…22,0 3,0…30,0 4,0…45,0 5,5…90,0
The number of auger revolutions, rpm от 40 до 147
Perfomance, м3/h 1,0…6,5 3,0…11,0 6,5…22,8 13,5…46,8 25,0…88,0 52,0…104,0
Thickness of rotor blade, mm 2, 3, 4, 5, 6, 7, 8
Thickness of case blade, mm 2, 3, 4, 5, 6, 7
Type of screw blind, paddle, spiral without pipe
Worm feeders of WF-type