Belt elevators BE

Designed for vertical transportation of bulk fine-grinded (up to 40 mm) and powder-type materials, chemically non-aggresive with bulk density of no more than 2,5 t/min3 and temperature of no more than 150 °С (up 200 °С).

Elevators are completed with the belt of general use for transportation of materials with the temperature of no more than 60 oC, but if transporting materials with higher temperature elevators are completed with heat-resistant belt (up to 200 oC). Elevators can be produced out of rustless steel. Elevators have self-supporting shaft.  It is fixed with special frames to prevent side displacement. Elevator can be assembled with left or right drive positioning.

Name of the parameter and size BE-160 BE-200 BE-250 BE-320 BE-400 BE-500 BE-650
Perfomance, m3 5,6 10,0 21,8 32,0 58,0 62,0 102,0
Buckets
bucket type petty petty petty petty petty petty petty
width, mm 160 200 250 320 400 500 650
storage capacity, l 0,5 0,75 1,9 3,8 4.2 6,8 11,5
step, mm 320 400 400 500 500 630 630
Bucket velocity, m/s 1,5 1,5-2,0 1,85 1,85 1,5-2,0 1,5-2,0 1,5-2,0
Transportation height, mm от 5830 до 55630
Drum diameter, mm:
driving 400 400 500 500 630 630 630
tension 320 320 400 400 500 500 500
Drive power capacity, kW от 1,5 до 45
Pulling instrument fabric-ply belt according to NSS
Belt elevators BE
5 (100%) 1 Голос[ов]
Belt elevators BE